front axle

Failure Analysis on Outside Left Main Pin Hole of Vehicle Front Axle

汽车前轴左主销孔外侧断裂失效分析

Application of Low Carbon Mn-B Bainitic Steel to Automobile Front Axle

低碳Mn-B贝氏体钢在汽车前轴上的应用试验

Confined work area under the engine carrier and front axle.

发动机托架和前轴下有限的工作区。

MANEUVERABILITY. Short turning radius, less weight on the front axle.

灵活性: 较小的转弯半径, 前刚性轴上较轻的重量.

Design of Die Forging of Heavy Truck Front Axle

重型卡车前轴模锻设计

Laser Method to Test the Parallelism of Automobile Front and Rear Axle

激光法动态检测汽车前、后轴平行度

Increased risk of accidents when running in the front axle carrier.

运行前轴托架时会增加事故危险。

Failure Analysis and Preventive Actions for Automobile front Axle Knuckle

汽车前桥转向节失效因素探析及预防

Studying the effect of low amplitude loading on fatigue life of truck front axle

低幅载荷对汽车前轴疲劳寿命影响的试验研究

The Research of Change Rule of Automotive Front Axle Vertical Load Spectrum

汽车前轴垂直载荷谱变化规律的研究

Frame or the front axle should check the technical condition and the situation of steering.

应检查车架或前轴的技术状况及转向机构情况.

Development of Front Axle ⅰ Beams of High Toughness Microalloyed Steels

高韧性非调质工字梁的开发

Development of a Microalloy Steel for Vehicle Front Axle

非调质钢汽车前轴的开发研究

The Rapid Design System of the Front Axle of the Automobile

汽车前轴的快速设计系统

This paper examines the reliability optimization design for front-axle with non-normal distribution parameters.

讨论了随机参数服从 非 正态分布前轴的可靠性优化设计问题.

Front axle moved forward 60 mm, rear axle moved backwards 20 mm.

前桥前移60厚米, 后桥后移20毫米.

Roll forging technology and its 3D finite element simulation of automobile front axle

前轴成型辊锻工艺及三维有限元模拟

Application of Value Engineering to innovation design of the automobile front axle assembly

价值工程在汽车前轴总成改进设计中的应用

A mathematical model of 7 degrees of freedom of the tractor is established by the paper. Transfer performances and dynamic responses of front axle of the tractor are emphatically analyzed. The preceding theoretical analysis results are verified by excitation test of the tractor on MTS road simulator.

建立了拖拉机整机7自由度的数学模型，着重分析了拖拉机前桥系统的传递特性和动态响应，通过拖拉机在MTS道路模拟机上的激振试验对上述理论分析结果进行了验证。

The spray painting robot with five degrees of freedom in the front-rear axle production line is taken as example for studying coordinated trajectory planning.

本文以前后桥生产线上的一台五自由度喷漆机器人为例，研究其与生产线之间的协调轨迹规划问题。

Optimization Design of Double Front Axle Steering Swing Arm Mechanism in Heavy-duty Trucks

重卡双前桥转向摇臂机构的优化设计

Design of Measuring Device for Tractor Front Axle Shells

拖拉机前桥壳体测量机的设计

Use a suitable base for the front axle carrier.

对前轴托架使用合适的底座。

Then establish a double front axle steering system of whole mathematical model and its optimization model.

同时建立双前桥转向系统整体数学模型以及双前桥转向系统优化模型。

While the dual-front axle steering system of the heavy trucks is widely used, it becomes more and more important to study and analyze its kinematics performances.

随着我国重型载货汽车双前桥转向系统的广泛应用，对双前桥转向系统运动学的分析与研究变得日益重要。

Different types can be used on the front axle and rear axle.

前桥和后桥上可以使用不同的类型。

Sensitivity analysis on reliability of automobile front axle based on NESSUS

基于NESSUS的汽车前桥可靠性灵敏度分析

Dependent front suspensions have a rigid front axle that connects the front wheels.

整体式前悬挂与前轮车轴采用的是刚性连接.

Fatigue fracture analysis and improvement of front axle on Tractor Model 50

50型拖拉机前桥疲劳断裂分析和改进

Roll-Forging Technology of Automotive Front Axle Precision Performing and Die Design

汽车前轴精制坯辊锻工艺及模具设计